Manualshelf

Instructions / Assembly

ManualsBrandsFire Sense ManualsHeating, Ventilation, and Air Conditioning46,000 BTU Mocha Propane Gas Patio Heater with All-Weather Wicker Tank Cover
12345678910
Next, align the sides of each outer piece and the center piece and
insert the next 3 bolts through both holes. Tighten castle nuts on
bolts.
Reflector (#2) is comprised of 3 – outer pieces and 1 – center
piece. Locate all 4 pieces of Reflector (#2) which are wrapped in
bubble wrap. Unwrap and remove all pieces and peel off the
protective blue plastic on each piece. Locate 9 bolts and 9 cap
nuts in the plastic bag. Align the 3 – outer pieces with the 1 –
center piece and place a bolt through the center hole on each
piece as shown below. Tighten castle nut on each bolt.
Finally, insert bolt through holes located at outside edge of
adjoining panels of the reflector side pieces (3 bolts required)
and tighten castle nuts on bolts.
PRECAUTIONS
- 9 -