Instructions / Assembly

ManualsBrandsFire Sense ManualsHeating, Ventilation, and Air Conditioning46,000 BTU Mocha Propane Gas Patio Heater with All-Weather Wicker Tank Cover

Patio Heater

Model: PH01-S PH01-SS

Item number 60763

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odor continues, immediately

call gas supplier.

PLEASE retain this manual for

future reference.

FOR YOUR SAFETY

Do not store or use gasoline or

other flammable vapors or liquids

in the vicinity of this or any other

liance.

Instruction Manual & Parts List

INSTALLER: Please leave this manual to the consumer.

CONSUMER: Please retain with this manual for future reference.

WARNING: For outdoor use only.

-1-

CERTIFICATE TO

ANSI 83.26a-2008

CONFORM TO CSA

2.37a-2008

Intertek

Manufacturer: Changzhou Wellife Furnace Co., Ltd.

Summary of content (19 pages)

PAGE 1
Patio Heater Model: PH01-S PH01-SS Item number 60763 WARNING: For outdoor use only. FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odor continues, immediately call gas supplier. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. PLEASE retain this manual for future reference. CERTIFICATE TO ANSI 83.26a-2008 CONFORM TO CSA 2.
PAGE 2
Tools and parts needed for assembly DANGER CARBON MONOXIDE HAZARD This appliance can produce monoxide which has no odor. carbon Using it in an enclosed space can kill you. Never use this appliance in an enclosed space such as a camper, tent, car or home. WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the and installation, operating maintenance instructions thoroughly before installing or servicing this equipment.
PAGE 3
PRECAUTIONS NOTE: PLEASE READ THE FOLLOWING SAFETY RULES WARNING: This heater must only be used outdoors. Using this product in an enclosed area may cause injury, death or property damage. Only use in a well-ventilated space. Do not use in a building, garage, or any other enclosed area. Read the instructions before use. This heater must be installed in accordance with local codes or, in the absence of local codes, with the National Fuel Code, ANSI Z223.1.
PAGE 4
PRECAUTIONS CHECK THE HEATER IMMEDIATELY IF ANY OF THE FOLLOWING EXIST: 1. The smell of gas in conjunction with extreme yellow colored tips of the burner flames. 2. The heater does not reach temperature. 3. The burner makes a popping noise during use (a slight popping noise is normal when the burner is extinguished after using). Children and adults should be aware of the hazards of high surface temperature and should stay away to avoid burns or clothing ignition.
PAGE 5
ASSEMBLY -5-
PAGE 6
PRECAUTIONS ATTACHING WHEEL ASSEMBLY Step 1 1-1. Locate Wheel Assembly (17) and 2 nuts/bolts contained in plastic bag with Wheel Assembly (Fig. 1). Fig. 1 Step 2 2-1. Turn Base (15) so that holes for attachment of Wheel Assembly are facing you (Fig. 2). Fig. 2 2-2. Align holes in Wheel Assembly (17) with holes on Base (15) (Fig. 3). Insert bolts through both sets of holes and secure nuts on end of bolt (Fig. 4). Fig. 3 Fig. 4 Step 3 3-1.
PAGE 7
ASSEMBLY -7-
PAGE 8
ASSEMBLY -8-
PAGE 9
PRECAUTIONS Reflector (#2) is comprised of 3 – outer pieces and 1 – center piece. Locate all 4 pieces of Reflector (#2) which are wrapped in bubble wrap. Unwrap and remove all pieces and peel off the protective blue plastic on each piece. Locate 9 bolts and 9 cap nuts in the plastic bag. Align the 3 – outer pieces with the 1 – center piece and place a bolt through the center hole on each piece as shown below. Tighten castle nut on each bolt.
PAGE 10
ASSEMBLY - 10 -
PAGE 11
ASSEMBLY - 11 -
PAGE 12
ASSEMBLY - 12 -
PAGE 13
ASSEMBLY OPERATION - 13 -
PAGE 14
OPERATION - 14 -
PAGE 15
OPERATION - 15 -
PAGE 16
LOCATION OF HEATER WHILE IN USE - 16 -
PAGE 17
MAINTENANCE - 17 -
PAGE 18
TROUBLESHOOTING - 18 -
PAGE 19