Instructions / Assembly

STEP 8
Thread electrical cord through base connection pole section (Part 6) and insert 4 threaded bolts and lock washers as
shown in Figure11, 12 and 13.
STEP 9
Mount support collar flange (Part 7) to base assembly with wheels (Part 8) as shown in Figure 14, and secure with
flat washer, lock washer, and ¾” bolt as shown in Figure 15.
STEP 10
Carefully lift pole and head unit assembly and insert lower end of pole into support collar flange (Part 7) as shown in
Figure 16. Secure with 6 threaded bolts and lock washers.
FIGURE 12
FIGURE 11
FIGURE 13
FIGURE 14
FIGURE 15
FIGURE 16
8