Mounting bracket & curved upper arm assembled in proper upright position. Electrical junction box points down, tilt switch box is on top Attach support collar/flange to base. Thread collar thru hole in base and Hand tighten securely. See Fig. 2A.
Electrical cord routed thru telescopic body and out thru outlet opening near base
45degrees Angle of Heat spread 98" 10 ft Creates a generous zone of comfort! 10.
4.5" x 7" x 22" Base w/Wheel Assembly - Use non-abrasive cleaners and a soft cloth. Any scratches, chips or rust spots can be touched up using an exterior matte finish, black paint.
Clip ends must be aligned as close to end connectors of lamp tube when installed. Do NOT allow to touch tube lamp itself.
R Fire Sense R and Well Traveled Living R are registered trademarks of Well Traveled Imports, lnc . All assembly instruction presentation s are the property of Well Traveled Imports, lnc.R and are protected by U.S. copyrights and trademarks. All rights reserved.
