Installation and Operating Instructions

9
NO. L-C2-27409
Rev 4 - 0901121556
Changing the bulbs (if equipped)
WARNING
To protect from potentially sharp sheet metal and glass, wear
gloves and safety glasses during this procedure.
1. Turn off all electrical sources.
Important: Place one hand directly below the glass lens
and prepare to catch it when it is detached.
2. Carefully insert your fi ngernail or a thin plastic
spatula between the glass lens and the stainless
steel, and gently pry the glass lens out (Fig. 9-
1). Catch the lens (Fig. 9-2) and set it safely
aside.
Note: You may wish to take this opportunity to clean and dry
the lens with a standard household window cleaner.
Dry completely before reattaching.
3. Wearing a pair of gloves, reach into the fi xture,
gently grab the bulb (Fig. 9-3), and pull it straight
down and out of the fi xture so that the two pins at
the base of the bulb come all the way out.
Important: Bulb is halogen. DO NOT TOUCH with bare
hands. Oils from hands drastically reduce bulb
life.
Note: It may be helpful to rock the bulb gently backward and
forward while pulling it out.
4. Insert the new bulb into the socket so that both pins
slide all the way into the two holes in the bottom
of the socket and the bulb remains in place after
being released.
5. Place the lens back into the fi xture opening with the
curved cut-out toward the back and snap it fi rmly
but gently back into place.
Beverage Center Cover
To reduce the need for cleaning, cover your beverage
center between uses with the Fire-Magic
®
custom
cover (Fig. 9-4).
Always remove items from the upper storage area
before covering.
Uncover the beverage center with care. Always lift
or slide the cover gently off the upper storage rack.
Never pull sideways, as the rack may be damaged or
loosened.
Cleaning and Maintenance
Fig. 9-1
Fig. 9-2
Fig. 9-3
Fig. 9-4
Fig. 9-4