Installation Guide

ManualsBrandsFire Magic ManualsOutdoor Kitchen IslandsOutdoor Kitchen Island Package

REV 7 - 1611280835

L-C2-306

ASSEMBLY AND INSTALLATION OVERVIEW - DOUBLE DRAWER MODELS

CAUTION: Island components are heavy. CAREFULLY handle all components during assembly.

• Fig. 8-1 provides an overall orientation and bolt assembly detail for the island with double drawers.

(DC790 model shown. Assembly may slightly vary depending on island selected.)

• The DX430 assembles in a similar manner.

• Only DX790 models have a double sideburner cutout, a multi-piece countertop, and at least one multi-piece wall.

• This section is just an overview, refer to the following step-by-step section for complete assembly (and grill/

accessory installation) details.

Fig. 8-1

Overall Orientation

DC790-XXD model

shown

ASSEMBLY AND INSTALLATION (Cont.)

ASSEMBLY / INSTALL OVERVIEW

(Attach all)

ONLY HAND TIGHTEN

BOLTS DURING

STEPS 2 - 5!

FULLY TIGHTEN

DURING STEP 6.

1. Attach all levelers

2. Assemble left side wall

& rear wall

DX790 models: rear wall

consists of left piece (2A),

column (2B), and right

piece (2C)

3. Assemble right side wall &

install outlet box

4. Assemble front wall

DX790 models: front wall

consists of left piece (4A),

bottom beam (4B), top beam

(4C), and right piece (4D)

5. Assemble front wall to right

side wall

6. Adjust levelers to level top

surfaces of unit evenly, ensure

unit is square, then fully tighten

all bolts (not shown)

7. Install electrical (not shown)

8. Install drawer and doors

9. Install power supply box

(only bracket shown)

10. Place countertop

DX790 models: countertop

consists of left piece (10A),

right piece (10B), and

requires assembly

11. Install grill

12. Install double sideburner

(if applicable)

10B

10A