Installation Guide

ManualsBrandsFire Magic ManualsOutdoor Kitchen IslandsOutdoor Kitchen Island Package

REV 7 - 1611280835

L-C2-306

ASSEMBLY AND INSTALLATION OVERVIEW - REFRIGERATOR MODELS

CAUTION: Island components are heavy. CAREFULLY handle all components during assembly.

• Fig. 7-1 provides an overall orientation and bolt assembly detail for the island with refrigerator.

(DC790 model shown. Assembly may slightly vary depending on island selected.)

• The DX430 assembles in a similar manner.

• Only DX790 models have a double sideburner cutout, a multi-piece countertop, and a multi-piece rear wall.

• This section is just an overview, refer to the following step-by-step section for complete assembly (and grill/

accessory installation) details.

Fig. 7-1

Overall Orientation

DC790-XXR model

shown

ASSEMBLY AND INSTALLATION (Cont.)

1. Attach all levelers

2. Assemble left side wall

& rear wall

DX790 models: rear wall

consists of left piece (2A),

column (2B), and right

piece (2C)

3. Assemble right side wall &

install outlet box

4. Assemble front wall

5. Adjust levelers to level top

surfaces of unit evenly,

ensure unit is square, then

fully tighten all bolts (not

shown)

6. Install electrical (not shown)

7. Install doors

8. Place heat shield

9. Install power supply box

(only bracket shown)

10. Install refrigerator

11. Place countertop

DX790 models: countertop

consists of left piece (11A),

right piece (11B), and

requires assembly

12. Install grill

13. Install double sideburner

(if applicable)

ASSEMBLY / INSTALL OVERVIEW

(Attach all)

ONLY HAND TIGHTEN

BOLTS DURING

STEPS 2 - 4!

FULLY TIGHTEN

DURING STEP 5.

11B

11A