User Manual

10
SHELVING CONFIGURATIONS
Loading Tips and Suggestions
Your appliance is equipped with a cantilever shelf system
which provides maximum adjust ability and customizing of
the shelving arrangements listed below.
Refrigerator:
24" (61 cm) Wide Models:
With a solid door and door racks. Figure 14.
Door storage racks
Tall bottle
storage area
(2) Full width adjustable steel frame and at glass cantile-
ver shelf
(1) Full width door storage rack
(1) half width door storage rack
!
CAUTION
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving the
shelf.
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the appliance. Grasp the shelf front with
both hands, rotate the front upward and lift out. (See Figure
16). To install a shelf insert the shelf in the appliance and
insert the top hooks into the shelf support slots and drop
the shelf down so the hooks drop over the bottom of the
slots.
Make sure your cantilever shelf is secure on the shelf sup-
ports by pressing down on the shelf before loading.
!
CAUTION
Grasp the shelf by the
front with both hands
and rotate the front
of the shelf up, then
lift the shelf up and
remove the shelf from
the shelf ladders.
Place hook on
shelf into slot
of shelf ladder
to install
Figure 14
Figure 15
Figure 16