Installation Instruction

c. Connect the 2 extension ground wires to the grill
and power supply box ground wires AS SHOWN
in Fig. 8-3.
d. Connect the opposite end of the extension to
the searing station, as shown in Fig. 8-4 (molex
and ground wire connections).
e. Reconnect the power cord.
f. Slide the unit into the enclosure.
To install using the wire extension:
Locate the power supply box inside of the island
enclosure. Disconnect the power cord.
a. Disconnect the grill (male) molex connection
from the master switch harness. Disconnect
the grill ground wire from the power supply box.
(See Fig. 8-1)
b. Locate the side of the searing station wire
extension that has two molex connections.
Connect the extension (male) molex connection
to the master switch (female) molex connection.
Connect the extension (female) molex
connection to the grill (male) molex connection.
(See Fig. 8-2)
Fig. 8-1
Master switch
harness
Grill molex
connection
Power
supply box
Grill ground wire
DISCONNECT
Fig. 8-2
Searing station
wire extension
CONNECT
Fig. 8-3
CONNECT
Fig. 8-4
Wires from
searing station
CONNECT
Wire
extension
INSTALLATION (Cont.)
8
L-C2-380
Rev 1 - 1401131425