User guide

82 198 Pt Addr. Panel
PS-Tools 08/2010
Upload/Download Configuration Data
3. In Communication Mode list, select Modem. The information to view/modify the modem
settings appears in the Connection Settings dialog box.
4. In Modem Port, select the port to connect the computer to the modem.
5. Click AutoDetect to detect any modem, attached to the system. The details of the attached
modem (if any) are displayed in Modem Communication.
6. Click Clear Display to clear the displayed data if there are multiple lines of data to scroll
through in Modem Communication.
7. Type the DialPrefix, which is a number added before the Dial Number.
8. Type a test string in Test AT Command, and then click Send to check the modem connection.
9. Type the Dial N
umber, and then click Dial to connect to the fire panel.
10. Click Hangup to end the connection.
11. Select the Mod
em Type from the list. Based on the selected modem type, the Initialization
Parameter is displayed.
12. Type the Hangup String.
13. Click In
itialize Modem Port to initialize the port.
14. Type a test string in Initilization Parameter.
15. Click Save Modem Settings to save the settings.
16. Click Close to
close the Connection Settings dialog box.
Serial Port Settings
To view the serial port settings
1. Using the Find option, select the customer for whom the connection settings needs to be
viewed.
2. Click Upload/Download > Connection Settings in the initial customer screen in PS-Tools.
The Connection Settings dialog box appears.