User guide

Configuring Fire Panels
54 198 Pt Addr. Panel
PS-Tools 08/2010
Editing Modules
Using the Edit Device(s) option, you can edit the module type, module options, and the zone
mapping.
To edit the modules in the SLC loop
1. Select the check box corresponding to the
device you want to edit, in the SLC Loop Setup ->
Modules pane. You can select only one device at a time.
2. Click Edit Device(s) to edit the device information. The Edit dialog box appears.
3. Update the device information such as Device Type, Device Label, Device Options, and Zone
assignments.
4. Click OK. The
device information is updated in SLC loop setup.
Note You cannot modify the loop and device address using the Edit Device(s) option.