User guide

Configuring Fire Panels
28 198 Pt Addr. Panel
PS-Tools 08/2010
Configuring Input/Output
The input/output devices include the zones, NACs, and relays. You can configure each relay, zones,
special zones and NACS in the Input/Output Configuration pane.
Figure 5-3 Configuring I
nput/Output
Relay
The fire panel consists of one fixed and two programmable Form-C dry contact relays. The fixed
fail-safe relay monitors system troubles. The two programmable relays are factory default. They can
be programmed for system alarm and system supervisory, and configured for the following
operations.
•Alarm
• Supervisory
• Supervisory Auto Reset
• Trouble
• Communication Fail
• Process Monitoring
• Process Monitoring Auto Reset
•AC loss
• Hazard
•Medical
• Silenceable Alarm