User guide

PS-Tools User Guide
198 Pt Addr. Panel
PS-Tools 08/2010 23
Selecting Configuration Type
To select a configuration type
1. Using the Find option in the initial screen, select a customer record. For more information, see
Finding a Customer.
2. Click Configure to program the fire panel settings. The Configuration Type dialog box
appears.
3. In the Select Configuration list, perform one of the following:
• Se
lect the default option Factory Default, if you are configuring for the first time.
or
• Select a previously saved configuration which appears in the list.
4. Click OK. T
he System Info -> Communicator Settings -> Central Station pane appears (see
Figure 5-1).
Configuring System Info
In PS-Tools, configuring the system information involves the following steps.
1. Configuring the communicator settings (see Communicator Settings)
a. Central Station (see Central Station)
b. Primary Central Station (see Primary Central Station)
c. Secondary Central Station (see Secondary Central Station)
2. Configuring the input/output modules (see Configuring Input/Output)
a. Relays (see Relay)
b. Zones (see Zones)
c. Special Zones (see Special Zones)
d. NACs (NAC 1, NAC 2, NAC 3, and NAC 4) (see NAC (Notification Appliance Circuits))
3. Configuring the general system settings which
include the timers, clock format, trouble
reminder, and other settings (see Configuring General System
Settings)
4. Configuring the Optional Modules (see Configuring Optional Modules)
5. SLC Loop Setup (see SLC Loop Setup)