Users Manual

 List of available devices: below two buttons, is placed a dropdown list that shows all available COM
ports. Available COM ports not related to Fiplex devices will be shown with its number and
“Unknown device” label. COM ports related to Fiplex devices will show a device description.
 Embedded Web browser: graphical area where configuration and monitoring parameters will be
shown.
 File menu: contains menus to save repeater configuration to a file and load configuration from file to
repeater.
NOTE: if Fiplex Repeater is not turned on, related COM port will appear as “Unknown device”
8. Click “Scan Devices”
Now, the Fiplex unit is shown in the list of available devices, and connection button is enabled.
NOTE: Fiplex repeater could not appear in list, if COM port number is higher than COM16, depending on Windows
version. COM port number can be forced to arbitrary number (below COM16) through Device Administrator. In
order to change COM number, click “Properties” pop-up menu:
Confidential