Users Manual

Software
Introduction
Fiplex Fiber DAS can be fully configured and monitored through USB connection. Digital Master unit receives through
optical links monitoring and configuration data from remotes units. For this reason, whole system can be fully configured
and supervised from digital master unit.
USB Software
Software description (Digital Master)
If software has been successfully installed and connected to Digital Master (see section 0) status screen will
appear. In this screen, RF configurations parameters (channel frequencies, bandwidth filter, gains / attenuation)
and RF and optical links monitoring (RF input/output levels, AGC status, optical link status) are shown.
At left side of webpage, configuration menus are shown:
 Content
o Status: whole RF configuration and monitoring parameters are shown. These parameters are
described in next section.
o Tag: user can set a tag to ease repeater identification. For modifying the TAG, write a new value
in text field and click over Apply Changes link
Confidential