Users Manual

2. Enable channel filtering if needed and setup desired channel frequencies. If Fiplex Digital Fiber DAS is used as channel
selective, user has to know what frequencies are used in base station. Each channel can be enabled independently. Channels
not used can be showed / hidden using the “Show channels” checkboxes. If remote units are on and connected through optical
fiber, the corresponding uplink frequencies will be automatically set, too.
3. According to DL RF input levels, program input attenuator to avoid input overflow, and output attenuator for each remote
to obtain desired output level in each remote.
Set number of active channels and frequencies
Set Input attenuator
Set Output attenuator
Confidential