User's Manual

UM-0825 32
Select the serial COM port that just appeared on your PC. Remember that the BDA driver installs
itself as a generic COM port so if properly installed, you should have a new comport not present
before connecting the Signal Booster.
If the Signal Booster is not connected yet you can plug it now to your PC USB connector. The
OMS software should detect the new COM port automatically.
Note that the OMS will show only unoccupied COM ports. If you have more COM ports that are
being blocked by another application they won’t be show in this window.
For this devices Flow control should be set to None.
Click “OK” in order to continue.