User's Manual

UM-0825 25
6. Software Installation Troubleshooting Guide
6.1. Driver installation failure
If the automatic driver install process fails for some reason, you can do it manually. You must
have your PC connected via USB to your Fiplex nano Signal Booster.
Open your Control Panel and then go to Device Manager. You should see a screen like the
following where you can see an exclamation mark indicating that your OS does not have the proper
driver installed.
Right click on it and then choose “Update Driver Software”.
If the automatic driver install process fails for some reason, you can do it manually. You must
have your PC connected via USB to your Fiplex nano Signal Booster.