User's Manual

UM-0825 16

Commissioning

Figure 4

Figure 5 shows RF ports and AC and DC cable glands location.

1. Connect service antenna (“TO MOBILE” port) and donor antenna (“TO BASE” port) coaxial cables. N

type female connectors are used in the Signal Booster.

2. Once RF ports of the Signal Booster are properly loaded connect mains to the AC source.

Electrical installation must provide differential and termo-magnetic breaker elements according to electric

safety international regulations.

3 Make sure that not used cable glands are properly sealed. For this, use the seal plug and self-

amalgamating tape.

L N

TMB