Users Manual

NMS: SNMP Managers table
Network
This is a table has just one element with two items. The first one is the device's IP
address and it is read-only to avoid unwanted miss-configuration. This can only be
changed by means of the embedded web server or locally, through USB, by means of the
Fiplex Control Software. The second item is a “kind” of button intended for resetting the
embedded Ethernet hardware interface.
SNMP Network table
Field Name
OID
Description
Type
Net2TIp[0]
1.3.6.1.4.1.26355.2.50.4.2.1.2.
0
IP address
R/O
Net2TResetNetwork[0]
1.3.6.1.4.1.26355.2.50.4.2.1.3.
0
Network reset: reads as idle(1), sets to
reset(2)
R/W
The following MIB tree representation shows this table and following there is the NMS
view: