Users Manual

SNMP Agent
Fiplex Signal Booster includes a SNMPv1 agent that allows user to supervise the device
by means of 'SET' and 'GET' type commands and, asynchronous traps to notify alarm
conditions can be sent. The device is intended to be monitored by a polling NMS but it
can send traps to a NMS or Trap Receiver if enabled. Fiplex can provide a NMS system
upon request.
The following sections will show the user configurable, relevant information that can be
read via SNMP from the device. The tables will describe these values in order to explain
how the information has to be read and interpreted.
MIB Description
The associated MIB document is FIPLEX-BDA-SYSTEMv13-MIB.mib. The Fiplex MIB is
divided into blocks. Each block describes the characteristics and values of a specific
element but not all elements are implemented in this agent. Each MIB block is divided in
two segments, named 1T and 2T. Segment 1T contains the information that is fixed &
read only. Segment 2T has the information that can vary over time, regardless of it being
read/only or read/write.
The following sections will show the user configurable, relevant information that can be
read via SNMP from the device.
Manager
This is a table with 2 consecutive elements, one for each NMS. No checking is done of the
validity of the information stored in the table, so extra care must be taken by the user.
SNMP Managers table
Field Name
OID
Description
Type
Man2TAddress[0]
1.3.6.1.4.1.26355.2.50.3.2.1.2.
0
First NMS Address
R/W
Man2TAddress[1]
1.3.6.1.4.1.26355.2.50.3.2.1.2.
1
Second NMS Address
R/W
Man2TPort[0]
1.3.6.1.4.1.26355.2.50.3.2.1.3.
0
First NMS Port where to send traps
R/W
Man2TPort[1]
1.3.6.1.4.1.26355.2.50.3.2.1.3.
1
Second NMS Port where to send traps
R/W