Users Manual

General control frame for dual version
 General control frame. There are four sub-sections inside this frame:
o Main uplink control: RF main parameters regarding to uplink band are
contained in this section: gain, output power limit, squelch threshold, squelch
enable, PA enable control, RF output power indicator, and RF input overload,
PA status and stability alarms. Next table describes information of this frame:
Uplink frame
Parameter
Description
Main Gain
Set maximum gain of Signal Booster at UL band. Range
can vary between models.
Power Limit
Set maximum output power of Signal Booster at UL
band. System automatically will apply a correction to
share this limit between the active channels. For
instance, +18dBm band limit means +12dBm maximum
output power per channels for 4 active channels. Range
can vary between models depending on rated power.
Squelch Enable
Enabling this control, Signal Booster does not transmit
in each channel if RF input power do not exceed the
threshold level configured according to next row
Squelch Threshold
If squelch is enabled, input levels below this threshold
are not transmitted.