Users Manual

In case the Signal Booster had been fit with an internal modem-router, its own IP
address settings would be fixed and the modem's address would be shown in the
greyed boxes.
 Spectrum: this page shows estimation for input and output spectrum in either DL or
UL, whatever is selected by the user. Estimation for output spectrum takes into
account RF input levels, and gain, bandwidth filters and squelch options
programmed by the user, and it can be a useful tool for users to know how the
undesired signals are rejected by the channel selective Signal Booster.
The user can change start and stop frequency modifying text fields placed at the
page bottom. Minimum span is 200KHz and maximum span is the band covered by
the Signal Booster. In case the same frequency is set for both start and stop, then
zero-span is set. For user convenience, a zero-span checkbox is available that
makes that operation with one click, and chooses the start frequency setting as
the measurement frequency. That also disables the stop frequency setting and
changes it according to start frequency. And finally, measurements can be
averaged up to 32 times.