Users Manual

After authentication, web browser will load the main page of Fiplex Signal Booster
showing RF configuration and monitoring parameters.
At left side of webpage, configuration menus are shown:
Content
 Status: whole RF configuration and monitoring parameters are shown. These parameters are
described in the next section.
 Tag: user can set a tag to ease Signal Booster identification. For modifying the TAG, write a
new value in text field and click over Apply Changes link
 IP: At this page, Signal Booster IP address, network submask, gateway address and IP
addresses of SNMP Managers are shown. User can set addresses of two SNMP Managers
(IP where SNMP agent will send TRAP information). To modify, click over Apply Changes link
after writing new values on text fields.