Users Manual

Remote Web Server option

IP Connection

Fiplex Signal Boosters use an Ethernet module and 3G Router to give TCP/IP

connectivity (webserver and SNMP Agent). In local mode, user can connect

directly a computer to the Ethernet module using the inside Ethernet cable.

In order to access to web browser, default IP addresses of Ethernet module are

detailed in the next table:

IP Address

192.168.1.10

IP Address

Network submask

255.255.255.0

Network submask

Gateway

192.168.1.2

Gateway

Computer network adapter configuration needs to be set to same network

submask and gateway. IP address can take any value in this IP range (192.168.1.11,

for instance). These addresses can be changed by user.

Web pages description

Once the Ethernet module is properly configured, user can connect to the Signal Booster,

writing IP address in URL toolbar of any web browser available in its computer. Default

URL is http://192.168.1.10.

First screen to appear is Authentication. Default login and password are:

admin

Password

admin

Password

Password can be changed by user, using menu described in next sections.

NOTE: in order to restore password, push the button placed close to USB Connector during

5 seconds.