Users Manual

BE SURE THAT “TO MOBILE” AND “TO BASE” PORTS ARE
PROPERLY LOADED EITHER WITH 50 OHMS DUMMY LOADS, OR
RADIATING SYSTEM.
7. Execute the Fiplex Control Software. Next window will appear:
User interface controls:
 Scan Devices Button: refresh the available COM ports and identify Fiplex devices
 Connection Button: connect / disconnect software from Signal Booster
 List of available devices: below two buttons, is placed a dropdown list that shows all
available COM ports. Available COM ports not related to Fiplex Signal Boosters will be
shown with its number and “Unknown device” label. COM ports related to Fiplex Signal
Boosters will show a device description.
 Embedded Web browser: graphical area where configuration and monitoring parameters
will be shown.
 File menu: contains menus to save Signal Booster configuration to a file and load
configuration from file to Signal Booster.
NOTE: if Fiplex Signal Booster is not turned on, related COM port will appear as
“Unknown device”
8. Click “Scan Devices”