Manualshelf

Users Manual

ManualsBrandsFiplex Communications ManualsIndustrial & Scientific700/800 MHz Dual Band Industrial Booster
21222324252627282930
3. Turn on UL and DL power amplifiers, and check that any alarm indicator is active.
TURN ON POWER
AMPLIFIERS
PA ON in narrow band version
TURN ON POWER
AMPLIFIERS
PA ON in adjustable bandwidth version
4. Setup desired operating gain using FCS. UL and DL chain are independent, so both values must
be set. To set DL band gain is recommended that AGC works around 3dB in each channel, in this
way, maximum output power is achieved.
5. Set up squelch settings. Controls are independent in UL and DL bands. Typical values for UL are -
110dBm for squelch threshold. For DL, recommended value for squelch threshold is minimum
level received in any active channel minus 10dB.