Users Manual

Rack mount option
Even though this cabinet is designed mainly to be wall or pole mounted, it has the option
to be installed in a 19” standard rack using the Rack Mount Option.
The Rack Mount Option are adaptors that allow the installation of the cabinet bracket to
the 19” rack.
It is recommended to use 2 post racks, this way, using back-to-back installation, 4 cabinets
can be installed in a single 2 post RU rack.
Mount the 19” rack
adaptors.
Mount the cabinet
bracket to the
adaptors.
Mount and Fix the Signal
Booster / Master /
Remote to the bracket.
Figure: Installation steps for the rack mount option FCR012
Mounting clearance on rack mount option
When mounting the cabinet in a 19” rack, the clearances around it should be considered
to allow a clear open door and heat dissipation.