User's Manual

User Manual– Digital DAS 1
Part 1 HARDWARE
1. Safety
Dangerous Voltage Warning
Any personnel involved in installation, operation or service of Fiplex Digital Fiber DAS must understand
and obey the following:
The power supply unit in Digital Fiber DAS supplied from the mains contains dangerous voltage level,
which can cause electric shock. Switch the mains off prior to any work in such a Digital Fiber DAS. Any
local regulations are to be followed when servicing Digital Fiber DAS.
Authorized service personnel only are allowed to service Digital Fiber DAS while the main is switched on.
Any Digital Fiber DAS, including this Digital Fiber DAS, will generate radio signals and thereby give rise to
electromagnetic fields that may be hazardous to the health of any person who is extensively exposed to the
signals at the immediate proximity of the Digital Fiber DAS and the Digital Fiber DAS antennas.
Radiation Hazard Warning
R&TTE Compliance Statement
This equipment complies with the appropriate essential requirements of Article 3 of the R&TTE Directive
1999/5/EC.
Station Ground
BTS chassis, Digital Fiber DAS, feeders, donor antenna, service antenna/s and auxiliary equipment (splitters,
tabs, .etc) are required to be bonded to protective grounding using the bonding stud or screw provided with each
unit.
Electrostatic Discharge
Static electricity means no risk of personal injury but it can severely damage essential parts of the Digital Fiber
DAS, if not handled carefully.
Parts on the printed circuit boards as well as other parts in the Digital Fiber DAS are sensitive to electrostatic
discharge.
Never touch printed circuit boards or uninsulated conductor surfaces unless absolutely necessary.
If you must handle printed circuit boards or uninsulated conductor surfaces, use ESD protective equipment, or
first touch the Digital Fiber DAS chassis with your hand and then do not move your feet on the floor.
Never let your clothes touch printed circuit boards or uninsulated conductor surfaces.
Disposal of Electric and Electronic Waste
Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with unsorted
waste. Please contact your local recycling authority for disposal of this product.