User's Manual

UM-0849 18
5. Starting Operation
BE SURE THAT “TO MOBILE” AND “TO BASE” PORTS ARE PROPERLY
LOADED EITHER WITH 50 OHMS DUMMY LOADS, OR RADIATING
SYSTEM.
1. Turn on the Digital Signal Booster, connect computer to Signal Booster through USB cable, and run
Fiplex Control Software. It is recommend to turn off the power amplifiers.
2. Setup desired channel frequencies. Since Fiplex Signal Booster is channel selective, user has to know
what frequencies are used in base station.
3. Turn on UL and DL power amplifiers, and check that any alarm indicator is active.