User's Manual

UM-0101-01.09 – November 2009 1
Part 1 HARDWARE
1. Safety
Any personnel involved in installation, operation or service of Fiplex repeaters must understand
and obey the following:
Any repeater, including this repeater, will generate radio signals and thereby give rise to
electromagnetic fields that may be hazardous to the health of any person who is extensively
exposed to the signals at the immediate proximity of the repeater and the repeater antennas.
FCC Radiation Hazard Warning
To comply with FCC RF exposure requirements in Section 1.1307 and 2.1091 of FCC Rules, the
antenna used for this transmitter must be fixed-mounted on outdoor permanent structures with a
separation distance of at least 2 meter from all persons.
R&TTE Compliance Statement
This equipment complies with the appropriate essential requirements of Article 3 of the R&TTE
Directive 1999/5/EC.
BTS chassis, Repeater, feeders, donor antenna, service antenna/s and auxiliary equipment (splitters, tabs,
.etc) are required to be bonded to protective grounding using the bonding stud or screw provided
with each unit.
Static electricity means no risk of personal injury but it can severely damage essential parts of
the repeater, if not handled carefully.
Parts on the printed circuit boards as well as other parts in the repeater are sensitive to
electrostatic discharge.
Never touch printed circuit boards or uninsulated conductor surfaces unless absolutely
necessary.
If you must handle printed circuit boards or uninsulated conductor surfaces, use ESD protective
equipment, or first touch the repeater chassis with your hand and then do not move your feet on
the floor.
Never let your clothes touch printed circuit boards or uninsulated conductor surfaces.
Disposal of Electric and Electronic Waste
Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with unsorted
waste. Please contact your local recycling authority for disposal of this product.