User's Manual

FIPLEX • Electromagnetic Devices for Radiocommunication Systems
FIPLEX BIDIRECTIONAL AMPLIFIER - USER MANUAL
Power connectors – Check polarity before connect
In the presence of AC power, the system switchs automatically from DC power to
AC power in order to preserve battery charge.
Battery backup system is not provided with the repeater, nominal voltages and
currents should be observed in order to prevent from malfunction. See specification sheet.
For further assistance please contact factory.
VERIFY THAT CABLE GLAND IS WELL FITTED IN ORDER TO PRESERVE
WHEATER TIGHTNESS OF THE REAPETER.
Static electricity means a potential source of permanent damage for essential parts
of the repeater, if not handled carefully.
NEVER TOUCH PRINTED CIRCUIT BOARDS OR UNINSULATED
CONDUCTIVE SURFACES WITHOUT PROPER ELECTROSTATIC
DISCHARGE PROTECTION.
9 Document FIP-BDAM-07-EN