happy Finnish 22in LED 3D TV 22F7030 Owner’s manual
Contents Package Contents................................................... 2 Preparation.............................................................. 3 Safety Precautions.................................................. 3 3D Mode and 3D Images........................................ 4 CAUTION......................................................... 4 Health Warning!............................................... 5 Electrical devices not in the hands of children..... 6 Environmental Information .........
Features Package Contents • 3D Viewing: This product supports the 3D viewing function via an available broadcast or via HDMI, PC, YPBPR source. • Remote controlled colour LED TV. • Fully integrated Terrestrial digital TV (DVB-T MPEG2). SCREEN LANG SUBTITLE ZOOM REPEAT ROOT • HDMI connectors for digital video and audio. TITLE 1 2 3 4 5 6 7 LED TV • USB input. • Programme recording 9 8 • Programme timeshifting 0 TEXT SWAP • 1000 programmes (analogue+digital).
Introduction Moisture and Water Thank you for choosing this product. This manual will guide you through the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please keep this manual in a safe place for future reference. This device is intended to receive and display TV programmes. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder, VCR, PC etc.).
• Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area. • Do not try to recharge batteries, there is a danger of explosion. Replace batteries only with the same or equivalent type.
material on the cloth, make sure to shake off any dust before using it. • Do not scratch the surface of the Liquid crystal shutters with a sharp tool and do not clean it using chemicals. This may degrade the screen quality. • Do not apply force to the liquid crystal. • Do not drop or bend the product. • If the receiving range is out of the specified range, the screen may not be viewable as 3D video.
Connection to a Television Distribution System (Cable TV etc.) from Tuner Environmental Information Devices connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using a coaxial cable, may in some circumstances create a fire hazard.
Remote Control Buttons 1. Standby 2. Pause / Timeshift recording 3. Stop (in Media Browser mode) 4. No function 5. Rapid advance (in Media Browser mode) 6. No function 7. Subtitle on-off / TXT subtitle (analogue TV mode) / Subtitle (in Media Browser mode) 8. Blue button 9. Yellow buton 10. Numeric buttons 11. Previous programme 12. OK / Select / Hold (in TXT mode) / Channel List 13. Cursor right SCREEN LANG SUBTITLE ZOOM REPEAT ROOT TITLE 1 2 3 4 5 6 7 8 9 14. Mute 0 15.
TV and Operating Buttons FRONT and REAR VIEW Control switch VIEW Control Switch 1. Up direction 2. Down direction 3. Programme/Volume / AV / Standby-On selection switch Note:You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, source OSD will be displayed.
5. VGA Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. 6. SPDIF Out outputs audio signals of the currently watched source. Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input. Viewing the Connections - Side Connectors 1. The CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section.
CAUTION ! Using USB Media USB Connection • You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV. This feature allows you to play files stored in a USB drive or record programmes. • 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported. • To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature.
• Record, Play, Pause, Display (for PlayListDialog) keys could not be used when teletext is ON. If a recording starts from timer when teletext is ON, teletext is automatically turned off. Also teletext usage is disabled when there is ongoing recording or playback. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Not all cables shown in the illustration are supplied.
SCART Note: When the TV is switched to standby mode, the standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active HDMI Input Selection HDMI Cable (not supplied) Scart Cable (not supplied) Scart sockets Once you have connected external systems to your TV, you can switch to different input sources. Press “SOURCE” button on your remote control consecutively for directly changing sources.
Operation with the Remote Control • The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. • Functions of the menu system are described in the following sections. Volume Setting • Press V+ button to increase the volume. Press Vbutton to decrease the volume. A volume level scale (slider) will be displayed on the screen.
Red button (Prev Day): Displays the programmes of previous day. Green button (Next day): Displays the programmes of the next day. Yellow button (Zoom): Expands programme information. Blue button (Filter): Views filtering options. Numeric buttons (Jump): Jumps to the preferred channel directly via numeric buttons. INFO (Details): Displays the programmes in detail. • After all the available stations are stored, Channel List will be displayed on the screen.
(RECORD): the TV will start to record the selected programme. You can press again to stop the recording. Select Channel EPG Now and Next Record / Delete Record Timer In EPG menu, using this option, you can switch to the selected channel. IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.
Auto Channel Scan (Retune) Menu Operation Analogue Manual Search Analogue: Searches and stores analogue stations. Digital & Analogue: Searches and stores both analogue and aerial DVB stations. • Whenever you select an automatic search type and press OK button, a confirmation screen will appear on the screen. To start installation process, select Yes, to cancel select No by using .“ ” or “ ” and OK button.
Operating the Channel List Locking a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. • Select the channel that you want to lock and select Lock option. Press OK button to continue. • You will be asked to enter parental control PIN. Default PIN is set as 0000. Enter the PIN number. • Press “ ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu.
OK button to continue. Media Browser menu options will be displayed. Managing Stations: Sorting the Channel List You can select broadcasts to be listed in the channel list. To display specific types of broadcast, you should use the Active channel list setting. Also, when you insert USB devices, the media browser screen will be displayed automatically: Select Active channel list from the Channel list menu by using “ ” or “ ” button. Press OK button to continue.
to enable all. You can follow the disabLED functions with the change of the icons. Jump (Numeric buttons):Jump to selected file using the numeric buttons. BLUE: Changes media options. OK: Views the selected picture in full screen. / : Navigate menu Slideshow ( all images. button): Starts the slideshow using GREEN button: Views images in thumbnails. Play RED button: Sorts files by date. button): Starts the video playback.
Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all. You can follow the disabLED functions with the change of the icons. Note: If you start the playback with the button and activate the symbol, the TV will play the next music/video file. The playback will proceed accordingly and when the end of the list is reached, it will be played again from the beginning (loop function).
Subtitle Font Size: Sets subtitle font size (max. 54pt). Using the 3D Mode IMPORTANT! Read and understand the 3D mode safety precautions carefully for your safety before using the 3D function. Read and understand “3D Mode and 3D Images” precautions section on page 4. • You must use 3D glasses parallel to your TV. The picture may not be visible or may look dark if you do not stay within the viewing angle. • Use 3D glasses only when watching 3D picture with the correct angle.
Supported 3D Content Resolutions See Appendix F for supported 3D Content resolutions. Timeshift Recording • You can press (RECORD) button on the remote control again to record the next event on the EPG. In this case, OSD will display the programmed events for recording. IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.
use the 16:9 mode to restore the picture to its original shape. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Available playback options: • Play from start: Plays the recording from the beginning. • Resume: Recommences the recordings. • Play from offset: Specifies a playing point. Note: Viewing main menu and menu items will not be available during the playback. Press (STOP) button to stop a playback and return to return to Recordings Library.
Configuring Picture Settings You can use different picture settings in detail. Press MENU button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Noise Reduction: If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to one of these options: Low, Medium, High or Off. Advanced Settings • Colour Temp: Sets the desired colour tone.
Autoposition: Automatically optimizes the display. Press OK to optimize. H Position: This item shifts the image horizontally to right hand side or left hand side of the screen. V Position: This item shifts the image vertically towards the top or bottom of the screen. Dot Clock: Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Operating Settings Menu Items Configuring Language Preferences • Press “ ” or “ ” button to highlight a menu item. • Press OK button to select an item. You can operate the TV’s language settings using this menu. • Press MENU button to exit. Settings Menu Items Conditional Access: Controls conditional access modules when available. Language: Configures language settings. Press MENU button and select the Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu.
Language Settings Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. • Press OK button to view more options. In the configuration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set.
Deleting a Timer Timers To view Timers menu, press MENU button and select Settings icon by using “ ” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Timers and press OK to continue: Setting Sleep Timer This setting is used for setting the TV to turn off after a certain time. • Highlight Sleep Timer by using “ ” or “ ” button. • Use “ ” or “ ” button to set. The timer can be programmed between Off and 2.00 hours (120 minutes) in steps of 30 minutes.
After you enter the pin, a pop-up menu appears on the screen to ensure that the hard disk should be formatted, select “YES” and press OK to format the hard disk. Select “NO” and press OK to cancel. Ensure you back up important recordings before you format the USB disk unit. Configuring Source Settings You can enables or disable selected source options. The TV will not switch to the disabled source options when SOURCE button is pressed.
Menu Timeout: Changes timeout duration for menu screens. Scan Encrypted Channels: When this setting is on, search process will locate the encrypted channels as well. If it is set as Off, encrypted channels will not be located in automatic search or manual search. Blue Background (Optional): Activates or deactivates blue background system when the signal is weak or absent. Software Upgrade: To ensure that your TV always has the most update information, you can use this setting.
Coloured Buttons (RED/GREEN/YELLOW/ BLUE) Your TV supports both FASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. When FASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to with your needs. The coloured writings will appear, showing you which coloured buttons to use when TOP text transmission is present.
Appendix A: PC Input Typical Display Modes Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix D: Software Upgrade Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information.
Appendix E : Supported File Formats for USB Mode Media File Extension .mpg, .mpeg Video MPEG1, 2 .dat MPEG1, 2 .vob MPEG2 .mkv Format Audio MPEG Layer 1/2/3 Remarks (Maximum resolution/Bit rate etc.) MPEG2 H.264, MPEG1,2,4 EAC3 / AC3 MAX 1920x1080 @ 30P 20Mbit/sec MPEG4, Xvid 1.00, Movie Music Photo Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10beta1/2 H.264 PCM/MP3 MPEG2, MPEG4 PCM/MP3 .avi Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2 H.264 PCM .
Appendix F: Supported 3D Content Resolutions HDMI MBV MBP DTV ATV OTHER 1080p@24 FP Supported Not Supported Not Supported Not Supported Not Supported Not Supported 720p@50 FP Supported Not Supported Not Supported Not Supported Not Supported Not Supported 720p@60 FP Supported Not Supported Not Supported Not Supported Not Supported Not Supported 1080p FC SBS, TB SBS, TB SBS, TB SBS, TB Not Supported SBS, TB 720p FC SBS, TB SBS, TB SBS, TB SBS, TB Not Supported SBS, TB
Vertical Viewing Angle 3D Viewing Information Your 3D Viewing experience can be affected by the location of the viewer and the TV set. To maximise your enjoyment we recommend you follow the guidelines below: It is always recommended to place a TV at the correct seated eye height of the viewer. If the TV must be placed higher or lower it should be tilted accordingly in its stand or wall mount.
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC, 50 Hz AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (WRMS.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
50220183 www.finluxdirect.
