Contents Safety Information...............................................................1 Getting Started....................................................................2 Notifications & Features & Accessories...............................2 Features..............................................................................2 Control Buttons on the TV...................................................2 Connect Power ...................................................................
Getting Started • AVL (Automatic Volume Limiting). Notifications & Features & Accessories • PLL (Frequency Search). Environmental Information This television is designed to consume less energy to help save the environment. To reduce energy consumption, you should take the following steps: • PC input. If you set the Power Save Mode as Eco, the TV will switch to energy-saving mode. The Power Save Mode settings can be found In the ‘Picture’ section of the Main Menu.
Scroll through the stored channels by pushing the button up or down Information for Users on Disposal of Old Equipment and Batteries To change source: Press the middle of the button twice, the source list will appear on screen. Scroll through the available sources by pushing the button up or down. [European Union only] To turn the TV off: Press the middle of the button down and hold it down for a few seconds, the TV will turn into standby mode.
Getting Started Remote Control 1. Standby / On 2. Channel list 3. Volume up-down 4. Menu on/off 5. OK / Confirm 6. Return / Back 7. No function 8. My button 1 9. My button 2 TV 10. Coloured buttons (Red, Green, Yellow, Blue) 11. Mono-Stereo Dual I-II / Current language 12. Fast rewind (in media browser mode) 13. Pause (in media browser mode) 14. Record programme 15. Play (in media browser mode) 16. Stop (in media browser mode) 17. Fast forward (in media browser mode) 18.
Getting Started Connections Connector Type Scart Connection (back) SIDE AV VGA Connection (back) PC/YPbPr Audio Connection (side) HDMI Connection (back) SPDIFF Connection (back) HEADPHONE SIDE AV SPDIFF Side AV Connection (side) Headphone Connection (side) Cables Device (not supplied) (not supplied) PC Audio Cable (not supplied) (not supplied) (not supplied) AV Cable (not supplied) (not supplied) USB Connection (side) CI Connection (side) CAM module DC 12V Input NOTE: When connecting a
Getting Started First Time Installation - USB Connections Switching On/Off To Switch the TV On Connect the power cord to the 110-240V AC, 50/60 Hz. To switch on the TV from standby mode either: Press the “ ” button, P+ / P- or a numeric button on the remote control. Press the side function switch until the TV comes on from standby. To Switch the TV Off Press the “ “ button on the remote control or press the side function switch until the TV switches into standby mode.
Do not plug out the USB/HDD during a recording. This may harm the connected USB/HDD. Multipartition support is available. The maximum of two different partitions are supported. The first partition of the USB disk is used for PVR ready features. It also must be formatted as the primary partition to be used for the PVR ready features. Some stream packets may not be recorded because of signal problems, so sometimes video may freezes during playback.
TV Menu Features and Functions Picture Menu Contents Mode You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. Sharpness Sets the sharpness value for the objects displayed on the screen. Colour Sets the colour value, adjusting the colors.
TV Menu Features and Functions Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in user mode. Balance This setting is used for emphasizing left or right speaker balance. Headphone Sets headphone volume. Sound Mode You can select a sound mode. (If the selected channel supports). AVL (Automatic Volume Limiting) Function sets the sound to obtain fixed output level between programmes.
TV Menu Features and Functions Store Mode (Optional) Power Up Mode If you are displaying the TV in a store, you can activate this mode. Whilst Store Mode is enabled, some items in the TV menu may not be available. This setting configures the power up mode preference. Install and Retune Menu Contents Automatic Channel Scan (Retune) (If available) Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Analogue: Searches and stores analogue stations.
(RECORD): The TV will start to record the selected programme. You can press again to stop the recording. P+P- : More event info IMPORTANT: Connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable the recording feature. Note: Switching to a different broadcast or source is not available during a recording. Troubleshooting & Tips Tv will not turn on Make sure the power cord is plugged in securely to wall outlet.
PC Input Typical Display Modes AV and HDMI Signal Compatibility The following table is an illustration of some of the typical video display modes. Your TV may not support all resolutions. Your TV supports up to 1920x1080.
DVD Mode On cleaning • Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Safety Information CAUTION DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed.
DVD Control Panel Buttons A. Disc loader B. Play / Pause Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc. C. Stop / Eject Stop playing disc / Eject or Load the disc Note: • You cannot eject the disc via the remote control. • While playing a file, you should press STOP button three times to eject. Overview of the Remote Control 1. standby 2. Menu 3. Ok / Select 4.
General Operation You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. DVD Movie Playback Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop / Skip backward/ forward Skip backward/ forward Rotate Skip backward/ forward / Highlights a menu item / Shifts the zoomed picture up or down (if available).
General Playback Basic Play 1. Press on the power button 2. Please insert a disc to the loader. The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it. A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the Film Company. This behaviour depends on the disc content and may change. Note: Step 3 and 4 is available only when a menu is recorded on the disc. 3.
Disc Types Compatible with This Unit Disc Types (Logos) DVD Recording Disc Types Size Max. Playing Characteristics Time Single- Audio + sided; 240 min. 12 cm Double- Video sided; 480 min. AUDIO-CD Audio MP3-CD Audio (xxxx.mp3) PICTURE-CD Video (still picture) 12 cm 74 min. It depends 12 cm on MP3 quality. It depends 12 cm on JPEG quality. • DVD contains excellent sound and video due to Dolby Digital and MPEG-2 System.
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.
YEAR GUARANTEE WARRANTY CARD Thank you for your purchase. We are sure you will enjoy using Finlux for many years. The product warranty is for a period of twelve (12) months from the date of original purchase. Any defect caused by faulty materials or workmanship will be repaired free of charge where possible during this period by Finlux. If a repair is not possible, the product will be replaced free of charge or a refund will be given.
Warranty Exclusions A. This Warranty does not extend to loss (liquid ingression), theft, vermin or insect infestation. B.
