Operation Manual
English - 10 -
Quick Menu
The Quick Settings menu allows you to access some
options quickly. This menu includes Power Save Mode,
3D Mode, Virtual 3D, Picture Mode, Favourites, Sleep
Timer, FollowMe TV, FollowMe TV to DMR , CEC RC
Passthrough options. Press Q.MENU button on the
remote control to view the quick menu. See the following
chapters for details of the listed features.
FollowMe TV (Optional)
With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe
TV feature. Install the appropriate Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note: This application is not compatible with all mobile devices.
FollowMe TV to DMR (Optional)
This feature allows video streaming from your TV to
mobile devices using proper applications (e.g. UPnP -
Universal Plug and Play - applications like BubbleUPnP)
or to another TV. Activate FollowMe TV to DMR from the
System>Settings>More menu and timeshifting starts.
Start the application on your device and select your TV.
To stream to another TV press the Red button on the
remote after starting a timeshift recording by pressing
the Pause button on the remote. Device selection menu
will be displayed. Choose the receiver TV and press OK.
Note: FollowMeTV and FollowMe TV to DMR features require
a connected USB storage device with FAT32 format and enough
space in it. Media Renderer option in the More menu should be
set as Enabled. HD channels are not supported and both of the
devices must be connected to the same network.
E-Manual (Optional)
You can nd instructions for your TV’s features in
the E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen.
By using the navigation buttons select a desired
category. Every category includes a different topics.
Select a topic and press OK to read instructions.
To close the E-Manual screen press the Exit button.
Note: The contents of the E-Manual may vary according
to model.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the System>Settings>More menu
should be set as Enabled at rst. Press the Source
button and select the HDMI input of the connected CEC
device from the Source List menu. When new CEC
source device is connected, it will be listed in source
menu with its own name instead of the connected HDMI
ports name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.
To terminate this operation and control the TV via
the remote again, press and hold the “0-Zero” button
on the remote control for 3 seconds. Or press Quick
Menu button on the remote, highlight the CEC RC
Passthrough and set as Off by pressing Left or Right
button. This feature can also be enabled or disabled
under the System>Settings>More menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).
When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio from
connected audio device only (same as other optical or
co-axial digital audio outputs). If you want to change
connected device’s volume level, you should select that
device from the source list. In that case volume control
keys are directed to connected audio device.
System Audio Control
Allows an Audio Amplier/Receiver to be used with
the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the Speakers option in the System>Settings>More
menu as Amplier. The TV speakers will be muted
and the sound of the watched source will be provided
from the connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.