Manual

NOTE: All GP Series pumps use PVDF Impellers.
Item Description Part No.
1
Impeller Housing
Polypropylene NPT M100101-1
PVDF NPT M100101-2
Polypropylene BSP 108173-1
PVDF BSP 108173-2
2
Housing Cover
Polypropylene M100109-1
PVDF M100109-2
3
Impeller
2-1/2", PVDF - for bellows/multispring seal models A101705-3
3-1/2", PVDF - for bellows/multispring seal models A101705-2
4-1/2", PVDF - for bellows/multispring seal models A101705-1
2-1/2", PVDF - for double seal models A101705-6
3-1/2", PVDF - for double seal models A101705-5
4-1/2", PVDF - for double seal models A101705-4
5
Cooling/Press Collar
(std for double seal, optional for bellows/multispring seals)
Polypropylene M100112
6
Motor Adapter
NEMA 56C, 143/145TC M101572-1
IEC 80 frame M101572-2
IEC 90 frame M101572-3
7
Seals
(standard options - contact factory for additional options)
Bellows - C/R/V J100108
Multispring - C/RH/V J100109
Double - C/RH/V,C/RH/V J100110
8
Retaining Ring
Stainless steel J100111
9
Hex Bolt
Stainless steel (6 required) J100112
10
Flat Washer
Stainless steel (6 required) J100113
11
Hex Bolt
NEMA 56C - stainless steel (4 required) J100114
IEC 80 frame - stainless steel (4 required) J103780
IEC 90 frame - stainless steel (4 required) J103662
Item Description Part No.
12
Lock Washer
NEMA 56C - stainless steel (4 required) J100115
IEC 80 frame - stainless steel (4 required) J100672
IEC 90 frame - stainless steel (4 required) J102282
14
Housing O-ring
FKM J100116
EPDM J100117
15
Cooling Collar O-ring (std for double seal, optional for bellows/multispring seal)
FKM J100118
EPDM J100119
17
Cooling Collar Seal
Lip seal - for bellows and multispring seal models only J100120
18
Slinger Ring
Neoprene M100115
20
Shaft Adapter with Set Screws
NEMA 56C A100856
NEMA 143TC, 145TC A100857
IEC 80 frame A100859
IEC 90 frame A100860
20A
Set Screw
Cap point, stainless steel (4 required) J100220
21
Cooling Collar Assembly
(for bellows & multispring seals models)
w/ FKM o-ring & lip seal A100185
22
Protective Guard
Left side M101637-1
Right side M101637-2
23
Guard Shroud Screw
Stainless steel J100932
*
Restrictor Bushing
TFE (use with bellows seal and item 5 &15) M100346
*
Pipe Plug
1/8”, 316SS - for use w/ restrictor bushing option
J103312
5