Manual

8
PART NUMBER EXPLANATION
1. Select base model (E.G. DB10P*)
2. If standard components are not suitable,
enter symbol(s) of alternative compo nents
in any order.
Base Model - -__-__-_______
DB10P E-Ff-14
DB10P-E-Ff-14 is a DB10P with EPDM O-ring,
fiberglass flanges and 145TC motor.
3. Alternative components - select from chart.
*The model number is on the serial number label
located on the motor adapter. The model num-
ber contains a base model that features certain
standard components. Compare the model num-
ber on the pump to the chart below to determine
if the pump contains any alternate components.
Model numbers containing “P” have primary
components molded from polypropylene. Model
numbers containing “V” have primary compo-
nents molded from PVDF.
Base model numbers are: DB6P, DB6V, DB6HP,
DB6HV, DB7P, DB7V, DB8P, DB8V, DB9P, DB9V,
DB10P, DB10V.
BASE MODEL
COMPONENTS
ALTERNATIVE COMPONENTS Code
Bushing Graphite Carbon
PTFE T
Alumina Ceramic* R
O-Ring FKM
EPDM E
Simriz* S
Kalrez* K
Connection NPT
BSP Threads B
Union* U
Steel enforced flange* Fs
Fiberglass enforced flange* Ff
Impeller
1
(Max size 60 Hz)
Select impeller from page #
2 3 4 5 6 7 8 9 10
Magnet
DB6/6H/7: 6-Pole
DB8/9/10: 8-Pole
(Upgrade for specific
gravity corrections)
6-Pole: up to .5 HP/.38 kW (56C, 63, 71 frame) 6p
8-Pole: up to 1 HP/.75 kW (56C, 145, 63, 71, 80 frame)* 8p
10-Pole: up to 2 HP/1.5 kW (56C,145, 63, 71, 80, 90
frame)*
10p
Motor
Adapter
56C NEMA
145TC NEMA 14
IEC 63/B14 64
IEC 71/B14 74
IEC 80/B14 84
IEC 90/B14 94
IEC 63/B5 65
IEC 71/B5 75
IEC 80/B5 85
IEC 90/B5 95
Specials
SS hardware, PTFE/
ceramic thrust rings,
ceramic shaft, Buna
o-ring vapor protec-
tion kit option (NEMA
only)
SiC bushing, thrust ring, shaft* Si
Hastelloy shaft* Hs
Titanium hardware* Ti
FKM o-ring vapor protection kit (NEMA only)* Vv
EPDM o-ring vapor protection kit (NEMA only)* Ve
ATEX (PVDF only)* A
Non-sparking ring* Ns
Motor Not Standard Select Motor Reference Number from Motor Price Sheets