Datasheet

FTLX8571D3BNL Product Specification – May 2009
© Finisar Corporation - May 2009 Rev B Page 5
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Bit Rate BR 9.95 10.5 Gb/s 1
Bit Error Ratio BER 10
-12
2
Maximum Supported Distances
Fiber Type 850nm OFL
Bandwidth
160 MHz-km 26
62.5μm
OM1
200 MHz-km
Lmax
33
m
400 MHz-km 66
OM2
500 MHz-km
82
50μm
OM3
2000 MHz-km
Lmax
300
m
Notes:
1. 10GBASE-SR/SW, 1200-Mx-SN-I. Contact Finisar for higher data-rate support.
2. 10GBASE-SR/SW, 1200-Mx-SN-I . Tested with a 2
31
– 1 PRBS @10
-12
BER.
VI. Environmental Specifications
Finisar 850nm SFP+ transceivers have an extended operating case temperature range
from 0°C to +85°C.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
0 85 °C
Storage Temperature T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.