Datasheet

FTLX6811MCC and FTLX6814MCC T-XFP Product Specification – July 2011 F i n i s a r
© Finisar Corporation 2011 1117598 Rev A03 Page 6
FTLX6814MCC
Receiver Sensitivity
5
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Sensitivity through Fiber
at OSNR >30dB (dBm)
Threshold
Adjust
Required
10.7 1E-4 -300 to 1600 -25.5 Yes
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Sensitivity back-to-
b
ack at OSNR>30dB
(dBm)
Dispersion Penalty
at OSNR>30dB
(dB)
Threshold
Adjust
Required
9.95 1e-12
-300 to 1450
-24 2 No
10.3 1e-12
-300 to 1450
-24 2 No
10.7 1e-4
-300 to 1450
-28 2.5 Yes
11.1 1e-4
-300 to 1450
-28 3 Yes
11.3 1e-4
-300 to 1450
-27 3 Yes
OSNR
Performance
6
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Min OSNR Back-to-
back at Power:
-18 to -7dBm (dB)
Max OSNR Penalty
at Power:
-18 to -7dBm (dB)
Threshold
Adjust
Required
9.95 1e-12
-300 to 1450
22 3 Yes
10.3 1e-12
-300 to 1450
22 3 Yes
10.7 1e-4
-300 to 1450
14.5 3 Yes
11.1 1e-4
-300 to 1450
14.5 3 Yes
11.3 1e-4
-300 to 1450
15 3 Yes
Notes:
1. Corresponds to approximately 0.4 nm.
2. λc = Specified ITU Grid wavelength. Wavelength stability is achieved within 30 seconds of power up.
3. Measured with a host jitter of 50 mUI peak-to-peak.
4. Measured with a host jitter of 7 mUI RMS.
5. Measured at 1528-1600nm with worst ER; PRBS31.
6. All OSNR measurements are performed with 0.1nm resolution.
V. Additional Specifications and Response Timing
Parameter Symbol Min Typ Max Units Ref.
Bit Rate BR 8.5 11.35 Gb/s 1
Maximum Supported Link Length L
MAX
80 km 2
PMD Penalty (30ps of DGD) 1 dB
Notes:
1. Amplified SONET OC-192, 10G Ethernet, SONET OC-192 with FEC, 10G Ethernet with FEC, 10G
Fibre Channel with FEC.
2. Distance indicates dispersion budget. Optical amplification may be required to achieve maximum
distance.
Transmitter Power Monitor Accuracy
Initial accuracy at 25C: +/- 1.5dB.
Relative accuracy over temperature, voltage and aging: +/- 2dB.