Datasheet

FTLX6611MCC and FTLX6614MCC T-XFP Product Specification – July 2011 F i n i s a r
© Finisar Corporation 2011 1134335 Rev A01 Page 6
FTLX6614MCC
Receiver Sensitivity
5
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Sensitivity back-to-
b
ack at OSNR>30dB
(dBm)
Dispersion Penalty
at OSNR>30dB
(dB)
Threshold
Adjust
Required
9.95 1e-12
-800 to +800
-17 2 No
10.3 1e-12
-800 to +800
-17 2 No
10.7 1e-4
-800 to +800
-21 2.5 Yes
11.1 1e-4
-800 to +800
-21 3 Yes
11.3 1e-4
-800 to +800
-20 3 Yes
OSNR
Performance
6
Data rate
(Gb/s)
BER Dispersion (ps/nm)
Min OSNR Back-to-
back at Power:
-14 to -2dBm (dB)
Max OSNR Penalty
at Power:
-14 to -2dBm (dB)
Threshold
Adjust
Required
9.95 1e-12
-800 to +800
24 3 No
10.3 1e-12
-800 to +800
24 3 No
10.7 1e-4
-800 to +800
14.5 3 Yes
11.1 1e-4
-800 to +800
14.5 3 Yes
11.3 1e-4
-800 to +800
15 3 Yes
Notes:
1. Corresponds to approximately 0.4 nm.
2. λc = Specified ITU Grid wavelength. Wavelength stability is achieved within 30 seconds of power up.
3. Measured with a host jitter of 50 mUI peak-to-peak.
4. Measured with a host jitter of 7 mUI RMS.
5. Measured at 1528-1600nm with worst ER; PRBS31.
6. All OSNR measurements are performed with 0.1nm resolution.
V. Additional Specifications and Response Timing
Parameter Symbol Min Typ Max Units Ref.
Bit Rate BR 8.5 11.35 Gb/s 1
Maximum Supported Link Length L
MAX
40 km 2
PMD Penalty (30ps of DGD) 1 dB
Notes:
1. Amplified SONET OC-192, 10G Ethernet, SONET OC-192 with FEC, 10G Ethernet with FEC, 10G
Fibre Channel with FEC.
2. Distance indicates dispersion budget. Optical amplification may be required to achieve maximum
distance.
Transmitter Power Monitor Accuracy
Initial accuracy at 25C: +/- 1.5dB.
Relative accuracy over temperature, voltage and aging: +/- 2dB.
Received Optical Power Monitor Accuracy (applicable measurement range defined from
-17dBm to -1dBm)
Initial accuracy at 25C: +/- 1.5dB.
Relative accuracy over temperature, voltage and aging: +/- 2dB.