Datasheet

FTLX1612M3BTL I-Temp 40km XFP Product Specification – November 2009 F i n i s a r
© Finisar Corporation 30-November-2009 Rev B2 Page 6
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Bit Rate BR 9.95* 11.3 Gb/s 1, 3
Bit Error Ratio BER 10
-12
2
Max. Supported Link Length L
MAX
40 km 1
Notes:
1. SONET OC-192 IR-2, OC-192 IR-3, 10GBASE-ER/EW, 10G Fibre Channel, ITU-T G.709,
10GBASE-ER/EW + FEC, 10G Fibre Channel + FEC
2. Tested with a 2
31
– 1 PRBS
3. The FTLX1612M3BCL can support 8.5Gb/s Fibre-Channel with the transceiver CDRs placed in “by-
pass” mode. CDR-bypass mode can be achieved by changing the register value in EEPROM-Table 0,
Byte 111, Bit 0.
a. Use bit 111.0 to enable/disable Rx CDR (“1” to bypass and “0” to engage)
By default, the CDR devices shall be engaged on power cycle or module reset.
VI. Environmental Specifications
The FTLX1612M3BTL transceiver has an operating case temperature range from -40°C
to +85°C.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
-40 85 °C
Storage Temperature T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar XFP transceivers are Class 1 Laser Products. They are certified per the following
standards:
Feature Agency Standard Certificate
Number
Laser Eye
Safety
FDA/CDRH CDRH 21 CFR 1040 and Laser Notice 50 9210176
Laser Eye
Safety
TÜV EN 60825-1: 1994+A11:1996+A2:2001
IEC 60825-1: 1993+A1:1997+A2:2001
IEC 60825-2: 2000, Edition 2
72082130
Electrical
Safety
TÜV EN 60950 72082130
Electrical
Safety
UL/CSA CLASS 3862.07
CLASS 3862.87
1439230
Copies of the referenced certificates are available at Finisar Corporation upon request.