Datasheet

FTLX1612M3BTL I-Temp 40km XFP Product Specification – November 2009 F i n i s a r
© Finisar Corporation 30-November-2009 Rev B2 Page 5
IV. Optical Characteristics (T
OP
= -40 to 85 °C, V
CC5
= 4.75 to 5.25 Volts)
Please note that the Transmitter of the FTLX1612M3BTL becomes operational within 5
seconds of power-up. This is due to the time required for the EML to reach its optimum
operating temperature.
Parameter Symbol Min Typ Max Unit Ref.
Transmitter
Output Opt. Pwr: 9/125 SMF P
OUT
-1 +2 dBm 1
Optical Extinction Ratio ER 8.2 dB 1
Optical Modulation Amplitude
ΟΜΑ
-2.1 dBm 2
Center Wavelength
λc
1530 1565 nm
Transmitter Dispersion Penalty
(@ 800 ps/nm)
TDP 2 dB
Sidemode Supression ratio SSR
min
30 dB
Tx Jitter (SONET) 20kHz-80MHz Tx
j1
0.3 UI 3
Tx Jitter (SONET) 4MHz – 80MHz Tx
j2
0.1 UI 3
Relative Intensity Noise RIN -130 dB/Hz
Receiver
Receiver Sensitivity @ 9.95Gb/s to
10.7Gb/s
R
SENS1
-16 dBm 4
Receiver Sensitivity @ 11.1Gb/s to
11.3Gb/s
R
SENS2
-15 dBm
Stressed Receiver Sensitivity (OMA)
@ 11.1Gb/s
R
SENS2
-11.3 dBm 5
Maximum Input Power P
MAX
-1 dBm
Optical Center Wavelength
λ
C
1270 1600 nm
Receiver Reflectance R
rx
-27 dB
Path penalty at 40km (up to 10.7Gb/s) 2 dB 6
LOS De-Assert LOS
D
-22 dBm
LOS Assert LOS
A
-28 dBm
LOS Hysteresis 0.5 dB
Notes
:
1. ER = 8.2dB minium for data rates 9.9Gb/s to 10.7Gb/s.
2. Guaranteed minimum OMA for 9.9Gb/s - 11.3 Gb/s.
3. GR-253-CORE Issue 4
4. Measured with worst ER; BER<10
-12
; PRBS31. Equivalent to –14.3 dBm OMA at ER = 8.2 dB.
5. Per IEEE 802.3ae. Equivalent to –14.3 dBm average power at Infinite ER.
6. Dispersion penalty is measured in loopback using 18 ps/(nm*km) fiber (SMF-28). Path penalty is 2dB
at 10.7Gb/s.