Datasheet

FTLF8524P3NL Pluggable SFP Product Specification – November 2011
© Finisar Corporation Nov 15, 2011 Rev.B Page 4
IV. Optical Characteristics (T
A
, V
CC
= 3. 10 to 3.46 Volts)
Parameter Symbol Min Typ Max Unit Ref.
Transmitter
Output Opt. Pwr: 50 or 62.5 MMF P
OUT
-9 dBm 1
Optical Wavelength
λ
830 860 nm
Spectral Width
σ
0.85 nm
Optical Modulation Amplitude OMA 247
μ
W
Optical Rise/Fall Time t
r
/ t
f
103 ps 2
Relative Intensity Noise RIN -118 dB/Hz
Deterministic Jitter Contribution
TX
Δ
DJ
28.2 ps 3
Total Jitter Contribution
TX
Δ
TJ
56.5 ps 4
Receiver
Receiver Sensitivity @3.7Gb/s (OMA) RxSENS -13 dBm 5
Average Receiver Power Rx
MAX
0 dBm
Optical Center Wavelength
λ
C
770 860 nm
Optical Return Loss 12 dB
LOS De-Assert LOS
D
-20 dBm
LOS Assert LOS
A
-30 dBm
LOS Hysteresis 0.5 dB
Notes:
1. Class 1 Laser Safety per FDA/CDRH, and EN (IEC) 60825 laser safety standards.
2. Unfiltered, 20-80%.
3. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ
and
Δ DJ.
4. If measured with TJ-free data input signal. In actual application, output TJ will be given by:
()()
22
DJTJDJTJDJDJTJ
INININOUT
Δ−Δ+−+Δ+=
5. Specifications are for 50 micro-meter or 62.5 micro-meter fiber.