Datasheet

FTLF8524E2xNy 2x7 Pin SFF Product Specification – July 2005
 Finisar Corporation July 12, 2005 RevG Page 5
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Data Rate BR 1.062,
2.125,
4.25
Gb/sec 1
Bit Error Rate BER 10
-12
5
Fiber Length on 50/125µm MMF
L 550
300
150
m 2
3
4
Fiber Length on 62.5/125µm MMF
L 300
150
70
m 2
3
4
Notes:
1. 1x, 2x, and 4x Fibre Channel compatible per FC-PI-2 Rev. 7.0.
2. At 1.0625 Gb/s Fibre Channel data rate.
3. At 2.125 Gb/s Fibre Channel data rate.
4. At 4.25 Gb/s Fibre Channel data rate.
5. At 1.0625, 2.125, and 4.25Gb/s with PRBS 2
7
-1.
VI. Environmental Specifications
Finisar SFF transceivers have an extended operating temperature range from –10°C to
+85°C case temperature.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
-10 85 °C
Storage Temperature T
sto
-40 85 °C
Notes:
1. SFF transceivers may be water washed with the optical port plug in position. However, the process
must be followed by a baking step at 80°C for one hour, to ensure the drying of any water which may
be trapped inside then shells of the modules.
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.