Datasheet

FTLF1619P1xCL Pluggable SFP Product Specification – March 2006 F i n i s a r
© Finisar Corporation March 30, 2006 Rev A Page 5
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Data Rate BR 1062 2125 Mb/s 1
Bit Error Rate BER 10
-12
2
Max. Supported Link Length on
9/125μm SMF @ 2X Fibre Channel
L
MAX2
104 km 3
Max. Supported Link Length on
9/125μm SMF @ 1X Fibre Channel
or Gigabit Ethernet
L
MAX3
112 km 3
Notes:
1. Gigabit Ethernet and 1x/2x Fibre Channel compliant.
2. Tested with a PRBS 2
7
-1 test pattern.
3. Attenuation of 0.25 dB/km is used for the link length calculations. Distances are indicative only.
A
2dB penalty is included for dispersion on >2Gb/s data rates. Please refer to the Optical Specifications
in Table IV to calculate a more accurate link budget based on specific conditions in your application.
VI. Environmental Specifications
Finisar SFP transceivers have an extended operating temperature range from -10°C to
+70°C case temperature.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
-10 70 °C
Storage Temperature T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.