Datasheet

FTLF1519P1xNL Pluggable SFP Product Specification – December 2005

V. General Specifications

Parameter Symbol Min Typ Max Units Ref.

Data Rate BR 1062 2125 Mb/sec 1

Bit Error Rate BER 10

-12

Max. Supported Link Length on

9/125μm SMF @ 2X Fibre Channel

MAX1

76 km 3, 4

Max. Supported Link Length on

9/125μm SMF @ Gigabit Ethernet

MAX2

88 km 3, 4

Notes:

1. Gigabit Ethernet and 1x/2x Fibre Channel compliant.

2. Tested with a PRBS 2

-1 test pattern.

3. Dispersion limited per FC-PI Rev. 13

4. Attenuation of 0.25 dB/km is used for the link length calculations. Distances are indicative only and

are calculated solely on link budget. A 2dB penalty is included for dispersion on >2Gb/s data rates.

Please refer to the Optical Specifications in Table IV to calculate a more accurate link budget based on

specific conditions in your application.

VI. Environmental Specifications

Finisar 1550nm SFP transceivers have an extended operating temperature range from

–5°C to +85°C case temperature.

Parameter Symbol Min Typ Max Units Ref.

Case Operating Temperature T

-5 85 °C

Storage Temperature T

sto

-40 85 °C

VII. Regulatory Compliance

Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.

These products are certified by TÜV and CSA to meet the Class 1 eye safety

requirements of EN (IEC) 60825 and the electrical safety requirements of

EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.

Copies of the referenced certificates are available at Finisar Corporation upon request.