Datasheet

FTLF1518P1BTL Pluggable SFP Product Specification – June 2009
© Finisar Corporation June 10, 2009 Rev A1 Page 5
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Data Rate BR 1062 1250 Mb/sec 1
Bit Error Rate BER 10
-12
2
Max. Supported Link Length on
9/125μm SMF @ Gigabit Ethernet
L
MAX
88 km 3, 4
Notes:
1. Gigabit Ethernet and 1x Fibre Channel compliant.
2. Tested with a PRBS 2
7
-1 test pattern.
3. Dispersion limited per FC-PI-4 Rev 8.00
4. Attenuation of 0.25 dB/km is used for the link length calculations. Distances are indicative only and
are calculated solely on link budget. A 2dB penalty is included for dispersion on >2Gb/s data rates.
Please refer to the Optical Specifications in Table IV to calculate a more accurate link budget based on
specific conditions in your application.
VI. Environmental Specifications
Finisar 1550nm SFP transceivers have an extended operating temperature range from
-40°C to +85°C case temperature.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
-40 85 °C
Storage Temperature T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
Copies of the referenced certificates are available at Finisar Corporation upon request.