Datasheet

FTLF1322F2xTR 2x5 Pin SFF Product Specification – April 2007 F i n i s a r
© Finisar Corporation April, 2007 Rev E Page 5
V. General Specifications
Parameter Symbol Min Typ Max Units Ref.
Data Rate BR 622 Mb/sec 1
Bit Error Rate BER 10
-10
2
Max. Supported Link Length on
9/125μm SMF @ OC-12
L
MAX5
15 km 4
Notes:
1. SONET OC-12 SR/SDH STM I-4 and SONET OC-12 IR-1/SDH STM S-4.1 compliant.
2. Tested with a PRBS 2
31
-1 test pattern.
3. Attenuation of 0.55 dB/km is used for the link length calculations (per GR-253 CORE). Distances are
indicative only. Please refer to the Optical Specifications in Table IV to calculate a more accurate link
budget based on specific conditions in your application.
VI. Environmental Specifications
Finisar 1310nm SFP transceivers have an extended operating temperature range from
–40°C to +85°C case temperature.
Parameter Symbol Min Typ Max Units Ref.
Case Operating Temperature T
op
-40 85 °C
Storage Temperature T
sto
-40 100 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.