Datasheet

FTL410QD2C Product Specification – July 2013 F i n i s a r
 Finisar Corporation – 24-Jul-13 Rev B5 Finisar Confidential Page 6
Parameter
Symbol
Min
Typ
Max
Unit
Ref.
Receiver (per Lane)

Signaling Speed per Lane
10.5
GBd
4
Center wavelength
840
860
nm
Damage Threshold
DT
3.4
dBm
Average Receive Power per Lane
RXP
x
-9.9
2.4
dBm
Receive Power (OMA) per Lane
RxOMA
3.0
dBm
Unstressed Receiver Sensitivity
(OMA) per Lane
URS
-11.1
dBm
Stressed Receiver Sensitivity (OMA)
per Lane
SRS
-7.5
dBm
Peak Power, per lane
PP
x
4
dBm
Receiver Reflectance
Rfl
-12
dB
Vertical eye closure penalty, per lane
1.9
dB
Stressed eye J2 jitter, per Lane
0.3
UI
Stressed eye J9 jitter, per Lane
0.47
UI
OMA of each aggressor lane
-0.4
dBm
Rx jitter tolerance: Jitter frequency
and p-p amplitude
(75, 5)
kHz, UI
(375, 1)
kHz, UI
LOS De-Assert
LOS
D
-12
dBm
LOS Assert
LOS
A
-30
dBm
LOS Hysteresis
0.5
dBm
Notes:
1. Transmitter consists of 4 lasers operating at a maximum rate of 10.5Gb/s each.
2. The maximum launch power of 0.5 dBm is well within the guardband of receiver overload specifications
for commercially available 10GBASE-SR SFP+ transceivers from Finisar and other vendors.
3. Even if TDP is <0.9dB, the OMA min must exceed this value.
4. Receiver consists of 4 photodetectors operating at a maximum rate of 10.5Gb/s each.
VI. Memory Map and Control Registers
Compatible with SFF-8436 (QSFP+). Please see Finisar Application Note.
VII. Environmental Specifications
Finisar FTL410QE2C transceivers have an operating temperature range from 0°C to +70°C
case temperature.
Environmental Specifications
Symbol
Min
Typ
Max
Units
Ref.
Case Operating Temperature
T
op
0
70
°C
Storage Temperature
T
sto
-40
85
°C