Use And Care Manual

6
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION / EXPLANATION
V Volts Voltage.
A Amperes Current.
Hz Hertz Frequency (cycles per second).
Alternating Current Type of current.
Class II Construction Double-insulated construction.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read the Operator's Manual
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Eye Protection
Always wear safety goggles, safety glasses with side shields, or a
full face shield when operating this product.
Safety Alert Precautions that involve your safety.
Risk of Bursting
Do not adjust the regulator to result in output pressure greater
than the marked maximum pressure of the attachment. Do not
use at a pressure greater than the rated maximum pressure of this
compressor.
Risk of Fire of Explosion
Do not spray flammable liquid in a confined area. Spray area must
be well ventilated. Do not smoke while spraying or spray where
spark or flame is present. Keep compressors as far from the
spraying area as possible, at least 15 feet from the spraying area
and all explosive vapors.
Risk of Electrical Shock
Hazardous Voltage: disconnect from power source before
servicing. Compressor must be grounded.
Hot Surface
To reduce the risk of injury or damage, avoid contact with any hot
surface.
Risk to Hearing
Always wear ear protection when using this tool. Failure to do so
may result in hearing loss.
Risk to Breathing
Air obtained directly from the air compressor should never be used
to supply air for human consumption.
SYMBOLS